> ## Content Index
> Fetch the complete content index at: https://www.thehogswarts.site/llms.txt
> Use this file to discover other available public pages before exploring further.

# Jewelry? and the backwall.
- URL: https://www.thehogswarts.site/jewelry-and-the-backwall/
- Published: 2026-11-14T17:01:00.000Z
- Updated: 2026-11-14T17:00:59.000Z
- Author: The Hogswart's

Hi,

This very fancy box came in the mail and got me confused.

![](https://storage.ghost.io/c/ae/d5/aed5ba52-6f2b-4041-ac88-10063d77a60d/content/images/2026/10/image-73.png)

I didn't order any jewelry for the truck that I'm aware of...

But as it turned out it was the switch that needed to replace the broken one. Not quite the same but, who knows...

![](https://storage.ghost.io/c/ae/d5/aed5ba52-6f2b-4041-ac88-10063d77a60d/content/images/2026/10/image-74.png)

This side is now fully functional, and all the switches are in one piece. Nice.

![](https://storage.ghost.io/c/ae/d5/aed5ba52-6f2b-4041-ac88-10063d77a60d/content/images/2026/10/image-75.png)

Some might have noticed that the new steering column was missing a piece. After checking some photos, we knew it had to be where we've stored the parts which we'd taken off. And so, we started to empty that corner. And hold and beyond: it came tumbling down as it had fallen somewhere in between. Also that part placed and the steering column is now done as well.

![](https://storage.ghost.io/c/ae/d5/aed5ba52-6f2b-4041-ac88-10063d77a60d/content/images/2026/10/image-76.png)

The inside backwall became a job itself...

![](https://storage.ghost.io/c/ae/d5/aed5ba52-6f2b-4041-ac88-10063d77a60d/content/images/2026/10/image-77.png)

I started out with a grated sheet of MDF to safe weight.

The six inch "Bump" on the back of the cabin turned out NOT to be square, and after measuring a thousand times it seemed. We finally had the guts to take the saw and started to cut it.

Oh my god, it fitted perfect!

![](https://storage.ghost.io/c/ae/d5/aed5ba52-6f2b-4041-ac88-10063d77a60d/content/images/2026/10/image-78.png)

Next, we needed to get the hole for the backdoor cut.

That went like a charm as well. With a little bit of tweaking and sanding it came out great.

![](https://storage.ghost.io/c/ae/d5/aed5ba52-6f2b-4041-ac88-10063d77a60d/content/images/2026/10/image-79.png)

The interior back wall is positioned half an inch away from the rear side because of the reinforcement bars. To ensure a snug fit against the door frame, I shaped a piece of foam using a saw and glued it around the inside of the back wall.

![](https://storage.ghost.io/c/ae/d5/aed5ba52-6f2b-4041-ac88-10063d77a60d/content/images/2026/10/image-80.png)

![](https://storage.ghost.io/c/ae/d5/aed5ba52-6f2b-4041-ac88-10063d77a60d/content/images/2026/10/image-81.png)

I think it looks good! The panels were mounted with velcro, so we can take them off when it becomes necessary.

![](https://storage.ghost.io/c/ae/d5/aed5ba52-6f2b-4041-ac88-10063d77a60d/content/images/2026/10/image-82.png)

See you next blog!