And it continous

The inside of the cabin is all taken out so it can be determined what and how to make a pass-through through the back wall. Also, we want a box on the roof of the cabin, so most likely reinforcements have to be made as well for that.

When the floor mats came out, we found a little surface rust at the driver's feet side, so the grinder with a wire wheel was used on it, rust converter was applied, and the day after I put some primer on it. I put the seat back, and now the truck is at the body shop to have a pass-through made.

In the meantime, we are looking for a second air ride seat base for the passenger side. Wheels are ordered, and tires are quoted for. The wheels are split-type wheels (Titan beadlocks) so you can repair them with small tools anywhere.

See you next blog.

Welcome to the blog of

Hi, in 2005 we decided to land as immigrants from the Netherlands to Southern Alberta. As team truck drivers we've seen most of the provinces in Canada, and all of the states in the USA. Some professional some by choice as we've done with the Territories

Cabin works,

As told before we had the truck over at LF truck centre in Fort Macleod AB, to have the rear wall changed to get a passthrough door mounted in the back. Our idea was to use a RV box door and LF truck centre came up with the idea; since

Tires...

Tirecraft in Claresholm AB helped us tremendously with receiving the tires for us as the had done with our rims. Thank you very much! Next task after the cleaning and painting of the rims was putting the tires on the rims. As I had the plan to put beadlocks in

Update and wheels

At this moment the truck is at the body shop to get the rear door in the cabin made, as well as a little more space, we will add 6 inch to the back of the cabin. That will give us some more legroom. In the mean time we used

Read more

Welcome to the blog of

Cabin works,

Tires...

Update and wheels